|
Standard Dimensions
Sizes are described as length x
width and are traditionally quoted
in feet. Our standard size trailers,
with internal metric dimensions, are
as follows:
6'x4' (1760mm x 1200mm)
7'x4' (2060mm x1200mm)
7'x5' (2060mm x1500mm), and
8'x5' (2400mm x 1500mm)
Other sizes
available upon request.
Light Duty, Medium and Heavy Duty builds
are available for box trailers, as well as optional
higher sides (21").
For custom trailers you
will need to nominate the length x width
x height expressed in either metres,
millimetres, inches or feet.
Floor
thicknesses
Checker plate = 2.1mm
Smooth (or "hot rolled sheet") =
1.5/1.6mm
Maximum
Weights
A trailer without brakes is limited
to 750 KG GVM. GVM is Gross Vehicle
Mass which means the combined mass
of both the load and trailer.
Trailers with a tare weight of up to
254kg (ie before a load is
added) are not required to be
inspected for registration renewals.
Anything heavier is required to get
a pink slip from an authorized
inspection station.
The NSW Roads &
Traffic Authority also charge a Motor
Vehicle Tax of at least $94 for tare
weights over 254kg. Please check out RTA
website or contact us for further
information.
For
custom trailers you need to estimate the maximum load
weight so we can determine the
appropriate suspension, chassis and
braking system required.
Accuracy here is critical, as repairs to
a damaged trailer due to overload can
often exceed the cost of
appropriate strengthening at the
manufacturing stage.
For enclosed trailers, you need to
specify where your entry points are to
be located as well as the style, eg.
lift up door, drop ramp, side swing door
etc
Registration
Registration is available on-site to all
NSW licence holders. As RTA ANVIS (Authorised
New Vehicle Inspection Scheme)
dealers we are able to
take care of all areas of the
registration process in
around 10 minutes. No need
for you to go to the RTA.
For private use a current NSW Drivers
Licence is required.
For business use we require an RTA
Customer Number issued with a purchase
order on a business letter-head showing
all business details. Also required is
evidence of incorporation - eg a
Certificate of Incorporation showing ACN
number.
Registration fees vary depending on
the type of use for the trailer, as well
as the weight and carrying capacity.
Initial registration costs which
includes stamp duty, plate fee and
dealer fee, start from $120 Private use,
followed by a $55 renewal fee.
These prices are subject to change
without notice.
Depending on the weight of your trailer,
a pink slip may be required for renewal
purposes.
No annual inspections are required for
registration renewals of our standard
single axle, un-braked box trailers.
The sizes are 6x4 13" & 21", 7x4 13" &
21" 7x5 13" and 8x5 13" .
Colour Finishes
We have a standard range of
hammertone colours. Pricing varies so
please include your choice of colour
when making an enquiry.
There are many colours available, with a
hammertone, enamel finish or 2
pack auto enamel finish, as well as Hot
Dip Galvanising.
The
standard range of hammertone colours
are Charcoal,
Silver and
Blue.
Custom Made Trailers
Austrailers make all types of trailers
to suit many purposes and are also
capable of creating original customised
solutions based on your needs.
Wheels/Tyres
As a standard in the industry, all trailers are
normally fitted with second hand wheels and tyres
(not retreads). All other components are new.
New tyres and
wheels are available at an optional extra.
Standard road tyres, light truck or off-road tyres
are available.
Wheel patterns
are available to suit Ford, HQ, HT, 4 stud Datsun, 6
stud LC, 5 Stud LC etc
Brakes
Mechanical Override disc brakes, hydraulic override,
or electric brakes are available.
Electrical
Wiring
7 Pin Round & Flat
Pin 1 = Left
Indicator-Yellow
Pin 2 = Auxiliary or reversing
signal-Black
Pin 3 = Earth-White
Pin 4 = Right Indicator-Green
Pin 5 = Electric brakes-Blue
Pin 6 = Stop Lights-Red
Pin 7 = Tail lights, no. plate &
Clearance-Brown
6 Pin Round
Pin1 = Tail lights, No. plate &
clearance-Brown
Pin2 = Left indicator-Yellow
Pin3 = Right Indicator-Green
Pin4 = Stop Light-Red
Pin5 = Auxiliary or reversing
signal-Blue
Pin6 = Earth-White
See also;
 Accessories,
Options and Spare Parts
| 
